[. . . ] Due to our continuing program of research and development, the specifications herein are subject to change without notice. ⷠNote: Specifications may differ from country to country. [. . . ] CAUTION: Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the ``OFF'' position when released. ⷠUse the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. this tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation. When driving into walls, floors or wherever ``live'' electrical wires may be encountered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!Hold the tool only by the insulated grasping surfaces to prevent electric shock if you drive into a ``live'' wire. Apply forward pressure to the tool to the extent that the bit will not slip off the screw. The proper fastening torque differs depending upon the kind or size of screws/bolts, the type of materials to be fastened, etc. (Material to be fastened: Lauan) NOTE: · Use the proper bit for the head of the screw/bolt that you wish to use. ⷠWhen fastening tool screws in a steel plate, the proper fastening torque can be obtained in an extremely short time (approx. ⷠHold the tool pointed straight at the screw or the screw and/or bit may be damaged. [. . . ] The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. [. . . ]